1. MOUNTING
1-3
3. Coat the waveguide flange with anticorrosive sealant as shown below.
Coating the waveguide flange with anticorrosive sealant
4. Coat fixing holes for the antenna radiator with anticorrosive sealant.
5. Grease the O-ring and set it to the O-ring groove of the radiator flange.
6. Set the antenna radiator to the radiator bracket.
7. Coat hex bolts M8x40 with anticorrosive sealant and use them to loosely fasten
the antenna radiator to the antenna unit chassis.
8. Remove two guide pins (inserted at step 1), and then tighten fixing bolts.
Hole for
a guide pin
5 mm
Anticorrosive sealant
Hole for
a guide pin
Waveguide cap
10 mm
O-ring
CAUTION
Be sure to remove the guide pins.
Injury may result if the guide pins loosen
and fall.
Summary of Contents for FCR-2829W
