Furuno FAR-3220W-BB, Installation Manual

Page: 13 / 185

EQUIPMENT LIST
xi
About the category sticker
This radar meets the requirements in IEC62388 (Marine naviga-
tion and radiocommunication equipment and systems-Shipborne
radar-Performance requirements, method of testing and required
test results).
Check the appropriate box on the sticker which is pre-attached to
the processor unit, according to your radar’s specification. Refer
to the table shown below to confirm your category.
Signal Cable Assy. S03-92-15(8P) 001-259-890 For sub monitor, RW-00136, 15 m
S03-92-30(8P) 001-259-900 For sub monitor, RW-00136, 30 m
S03-92-40(8P) 001-259-910 For sub monitor, RW-00136, 40 m
S03-92-50(8P) 001-259-920 For sub monitor, RW-00136, 50 m
Junction Box RJB-001
Spare Parts SP24-00801 001-235-320 For HUB-3000
Waveguide Twist RWA-1050 C-109 001-304-660 For FAR-3320W
Rectangular Guide
Clamp OP03-148 008-477-540
FR-9Termination FR-9-00 001-102-740
Waveguide Drain 03-009-0360-0 300-903-600
H-type Wave-
guide Clamp CP03-00600-W 008-198-420
E-Bend Wave-
guide RWA-1030 B-107 001-304-640
Operator’s Manual OME-36160-* English
OMJ-36160-* Japanese
Magnetron Re-
placement Instruc-
tion Manual E32-01306-* English
J32-01306-* Japanese
Waveguide Tool BSH-15279 000-192-229-10
Category Radar type ANT. rotation speed
CAT 1C FAR/3320W/3330SW 24 rpm
CAT 1HC Same models as above 42 rpm
CAT 2C FAR/3320W(-BB)/3330SW(-BB) 24 rpm
CAT 2HC Same models as above 42 rpm
Name Type Code No. Remarks
Comply with MSC.192(79)
CAT 1C
CAT 2C
CAT 1HC
CAT 2HC
Sticker for category