Furuno FAR-3220W-BB, Installation Manual

Page: 4 / 185

SAFETY INSTRUCTIONS
ii
CAUTION
Observe the following compass safe
distances to prevent deviation of a mag-
netic compass:
Note: For more information, please refer to IMO
SN/Circ.271 “Guidelines for the installa-
tion of shipborne radar equipment.”
Do not open the equipment
unless totally familiar with
electrical circuits and
service manual.
Only qualified personnel are
allowed to work inside the
equipment.
WARNING
ELECTRICAL
SHOCK
HAZARD
Construct a suitable service
platform from which to install the
antenna unit.
Serious injury or death can result if
someone falls from the radar antenna
mast.
Turn off the power at the mains
switchboard before beginning the
installation.
Fire, electrical shock or serious injury
can result if the power is left on or is
applied while the equipment is being
installed.
Be sure that the power supply is
compatible with the voltage rating
of the equipment.
Connection of an incorrect power
supply can cause fire or damage the
equipment.
Use only the specified power
cable.
Fire or damage to the equipment can
result if a different cable is used.
Do not install the monitor unit,
processor unit, transceiver unit,
power supply unit or control unit
in a dusty environment, or
one
where the units may get wet from
rain or water splash.
Dust or water in the units can result in
fire, electrical shock, or damage to
the equipment.
Attach protective earth securely to
the ship's body.
The protective earth (grounding) is
required for the AC power supply to
prevent electrical shock.
Transceiver Unit
(RTR-108)
2.00 m 1.25 m
4.50 m
2.90 m
Antenna Unit
(FAR-3320W)
Standard
compass
1.90 m 1.20 m
Antenna Unit
(FAR-3330SW)
1.55 m
0.95 m
Monitor Unit
(MU-231)
0.85 m 0.55 m
Monitor Unit
(MU-270W)
0.90 m 0.55 m
Radar Control
Unit (RCU-025)
0.30 m 0.30 m
Trackball Control
Unit (RCU-026)
0.30 m 0.30 m
Steering
compass
Intelligent HUB
(HUB-3000)
2.05 m 1.35 m
1.20 m 0.75 m
Processor Unit
(EC-3000)
2.40 m 1.55 m
Sensor Adapter
(MC-3000S)
0.75 m 0.50 m
Sensor Adapter
(MC-3010A0)
Sensor Adapter
(MC-3020D)
Sensor Adapter
(MC-3030D)
1.05 m 0.70 m
0.90 m 0.60 m
Switching HUB
(HUB-100)
1.00 m 0.60 m
Power Supply
Unit (PSU-014/
PSU-015)
2.20 m 1.40 m
Transceiver Unit
(RTR-109)
Junction Box
(RJB-001)
1.10 m 0.70 m