Furuno FA-30, Operator'S Manual

Page: 30 / 40

FURUNO
FA-30
3 INTERFACE
3.1 COM port
Input signal RS422(38.4kbps)/IEC61162-1(4800 bps)
Input sentences ACK, ACA, AIQ, DSC, DSE, DTM, GBS, GGA, GLL, GNS, HDT,
OSD, PFEC, RMC, VBW, VTG, ZDA, ABM*, BBM*, AIR*
Output signal RS422(38.4kbps)
Output sentences ACA, ACS, ALR, PFEC, VDM, VDO, TXT, ABK*
3.2 NETWORK Ethernet 10BASE-T/100BASE-TX
Input sentences ACK, ACA, AIQ, DSC, DSE, DTM, GBS, GGA, GLL, GNS, HDT,
OSD, PFEC, RMC, VBW, VTG, ZDA, ABM*, BBM*, AIR*
Output sentences ACA, ACS, ALR, PFEC, VDM, VDO, TXT, ABK*
* ABK sentence sent in response to mis-input of ABM, BBM, AIR
4 ANTENNA
50 ohms single dipole antenna
5 POWER SUPPLY
12-24 VDC: 1.2-0.6 A
6 ENVIRONMENTAL CONDITION
6.1 Ambient temperature -15°C to +55°C
6.2 Relative humidity 93% at 40°C
6.3 Degree of protection IP20
6.4 Bearing vibration - 2Hz to 5 Hz and up to 13.2 Hz with an excursion of ±1 mm ±10%
(IEC 60945-4) (7m/s
2
maximum acceleration at 13.2 Hz )
- above 13.2 Hz and up to 100 Hz with a constant maximum
㩷
acceleration of 7 m/s
2
7 COATING COLOR
N2.5
8 VHF SPLITTER (OPTION)
8.1 Rx function
Frequency range 155-163 MH
䌺
Coupling factor ANT-AIS and ANT-VHF: 3dB or less
SP-2
E4443S01C
070907