Furuno FA-30, Operator'S Manual

Page: 13 / 40

5
Attaching coaxial connector (M-P-5) to coaxial cable
The antenna cable (coaxial cable, type 5D-2V) is terminated at the FA-30 with an
M-P-5 coaxial connector. Attach the connector to the cable as shown below.
Connection with the PC and NavNet vx2
The FA-30 may be connnected to NavNet vx2, or to both NavNet vx2 and PC. See the figure below
for connection examples.
Sheath
30 mm
7 mm
2
mm
Conductor
Insulator
Braided
shield
Fasten tightly. Contact sleeve
Cut conductor here.
Coupling
ring
Solder here.
Solder here.
FA-30
RJ-45 to 6 Pin Cable
FA-30
DIRECT CONNECTION
Na
v
Net
v
x2/PC CONNECTION
Standard Ethernet
"Straight Thro
u
gh"
Cable,
RJ-45 to RJ-45
NavNet vx2 display unit
NavNet vx2 display unit
NavNet vx2 display unit
LAN Cable (CAT5)
RJ-45 to 6 Pin Cable
HUB
PC