Furuno FA-30, Operator'S Manual

Page: 16 / 40

8
(Windows
®
10)
a) Left-click [setting] from the start menu.
b) Left-click [Network & Internet].
c) Left-click [Change adapter options].
d) Right-click [Ethernet] and left-click [Properties].
e) Choose [Internet Protocol Version 4 (TCP/IPv4)] and left-click [Properties] button.
f) Choose [Use the following IP address].
g) Enter IP address 172.31.24.xxx (xxx=any three digits from 001 to 254, except 002).
h) Enter subnet mask 255.255.0.0.
i) Left-click [OK] button.
2. Open Internet Explorer and do the following:
a) Click Tools on the menu bar.
b) Click Internet Options.
c) The General tab is selected. Click Settings at Temporary Internet Files.
d) Click the radio button “Every visit to the page” at “Check for newer versions of stored page”.
e) Click the OK button.
f) Click the OK button again.
3. Enter URL as http://172.31.24.2 and press the Enter key.
4. Click Port Setup to show the Port Setup menu.