Furuno FA-30, Operator'S Manual

Page: 15 / 40

7
2.2 COM Port Setup, Network Setup
The FA-30 is set up from the PC or external display. The procedure below shows how to set up
the COM/POWER and NETWORK ports from a PC.
NOTICE:
Only one FA-30 may be connected to the network.
Start up
1. Start up the PC and enter IP address and subnet mask.
(Windows
®
2000/Windows
®
XP)
a) Right-click [My Network] and left-click [Properties].
b) Right-click [Local Area Network] and left-click [Properties].
c) Select [Internet Protocol and Properties].
d) Enter IP address 172.31.24.xxx (xxx=any three digits from 001 to 254, except 002).
e) Enter subnet mask 255.255.0.0.
(Windows
Vista
®
)
a) Right-click [Network] and left-click [Properties].
b) Right-click [Manage network connections].
c) Right-click [Local Area Connection] and left-click [Properties].
d) Choose [Internet Protocol Version 4 (TCP/IPv4)] and left-click [Properties] button.
e) Choose [Use the following IP address].
f) Enter IP address 172.31.24.xxx (xxx=any three digits from 001 to 254, except 002).
g) Enter subnet mask 255.255.0.0.
h) Left-click [OK] button.
(Windows
®
7)
a) Right-click [Network] and Left-click [Properties].
b) Left-click [Change adapter options].
c) Right-click [Local Area Connection] and left-click [Properties].
d) Choose [Internet Protocol Version 4 (TCP/IPv4)] and left-click [Properties] button.
e) Choose [Use the following IP address].
f) Enter IP address 172.31.24.xxx (xxx=any three digits from 001 to 254, except 002).
g) Enter subnet mask 255.255.0.0.
h) Left-click [OK] button.
(Windows
®
8)
a) Show desktop.
b) Right-click [Network] and Left-click [Properties].
c) Left-click [Change adapter options].
d) Right-click [Ethernet] and left-click [Properties].
e) Choose [Internet Protocol Version 4 (TCP/IPv4)] and left-click [Properties] button.
f) Choose [Use the following IP address].
g) Enter IP address 172.31.24.xxx (xxx=any three digits from 001 to 254, except 002).
h) Enter subnet mask 255.255.0.0.
i) Left-click [OK] button.