Furuno DP-6, Installation Manual

Page: 15 / 26

10
5. Initial Setting
Answerback Code & ID Code
Enter vessel’s answerback code and ID code as follows.
NOTE
The answerback and ID code number can
be written only once; be sure to enter the
codes correctly.
Answerback Code
Procedure
1. Press function key
F5
and then the [5] key. The display should
look something like below.
Answerback Code
Answerback Code Entry
Answerback Code Entry Screen
2. Enter vessel’s answerback code (max. 20 characters, including
spaces). Press the
ENTER
key. The prompt OK/CANCEL asks
for verification of data. If correct, press the ENTER key again.
Example
Answerback Code
123456789 FURU X
Answerback Code Entry
O K
Cancel
Caution
Confirm the 'CODE' before pressing ENTER key.
You cannot change the CODE once it has been entered.
Message for confirmation of code entered
www.reelschematic.com
www.reelschematic.com