Furuno DP-6, Installation Manual

Page: 16 / 26

11
3. For final verification of the data, the above CAUTION appears. If
correct, press the ENTER key again.
NOTE:
Form of answerback depends on coast statiton. Some re-
quest ship name and/or callsingn.
ID Code
Procedure
1. Press function key F5 and then the [6], [7], [8] or [9] key to enter
the Group ID Code (4 or 5 digits), Group ID Code (9 digits), Se-
lect ID Code (4/5 digits) or Select ID Code (9 digits), respectively.
Group ID Code (4 or 5)
Group ID Entry
ID Code Screen
2. Enter group ID or select ID. Then, press the
ENTER
key. A prompt
asks for verification of data. If correct, press the ENTER key.
Example
Group ID Code (4 or
12345
Group ID Entry
O K
Cancel
Caution
Confirm the 'CODE' before pressing ENTER key.
You cannot change the CODE once it has been entered.
Message for confirmation of code entered
3. For final verification of the data, the above CAUTION appears. If
correct, press the ENTER key again.
Note: Application software of DP-6 is already installed in the unit.
The floppy disk programed in the accessores is for backup.
www.reelschematic.com
www.reelschematic.com