Furuno DP-6, Installation Manual

Page: 17 / 26

12
System Settings
Press function key
F6
to display the System screen.
Setup Lock Change Default
*Slave Delay 5 msec (0- 50 msec)
*BK Timing PreTone 10 msec (0-100 msec)
PoseTone 0 msec (0- 20 msec)
*Mute Timing PreBK 0 msec (0- 20 msec)
PostBK 0 msec (0- 20 msec)
*Modem Output Level 0 dBm (-30 - +10 dBm)
MIF Tune OFF O N
Freeze OFF O N
AGC OFF O N
Emission OFF O N
TX/RX MSG Save OFF O N
Edit Before sending OFF O N
Time system OFF UTC SMT JST
Time & Data 1997/3/16/ 10;00;00
Display Mode Normal Reverse
Self Test
System
Procedure
To change settings, press the [ ] key to display change (on the Setup
line) in inverse video. Press the [ ] key to select item, then press the
[ ] or [ ] key to select option.
(“Default” on the Setup line is for factory use.)
Menu Description
Setup Lock/unlocks settings.
Slave Delay Sets the length of the slave delay timing in
the ARQ mode, between 0 - 50 msec.
BK Timing Pre Tone Sets the timing for the leading edge of the
BK signal in the ARQ mode.
Post Tone Sets the timing for the trailing edge of the
BK signal.
Mute Timing Pre BK Sets the timing for the leading edge of the
mute signal in the ARQ mode.
www.reelschematic.com
www.reelschematic.com