ABN: 68 606 541 468 Email: [email protected] 14
FAULT:
Furnace Not Turning on.
Make sure the furnace is connected to power.
Make sure the furnace door is closed, as it has a safety door switch to cut power
when the door is open.
FAULT:
The Error shown below in the picture is coming up on the temperature controller.
This is a thermocouple circuit error.
It could be a few things, the most common is the thermocouple is broken and
needs changing.
If you still have this error after changing out the thermocouple it could be because
a wire has become loose in the circuit. Try and tighten all wire connections from
thermocouple head to temp controller.
If you still have no luck then check the thermocouple wire has not been melted/
damaged. If it has, then replace it.
If all this fails, you may need to replace the temp controller.
Troubleshooting