ABN: 68 606 541 468 Email: [email protected] 31
Installing Floor Tiles
This method can apply to all fusion and cupel furnaces .
Reason: To stop the tile from sticking to the furnace or muffle floor so it can be
easily removed when needs to be replaced.
If tile does not crack it is also possible to reuse the tile on the opposite side.
Each time you replace a tile you must scrape out the old mabor powder (or bone
ash) and replace with new.
Mabor powder is used to soak up any spills you have during fusion or cupellation
processes.
The following is a tile install for a Cupellation furnace.
Step 1
Shovel Mabor powder or similar product
onto the floor
Step 2
Using a flat edge, flatten off so that powder is
about 1/2” thick. Make sure the service is level
from front to back.
Step 3
Place floor tile into position and settle down
flat.