Field
Description
IP Address Mode
Select whether your device is to be assigned a static IP address
or whether it should be assigned this dynamically.
Possible values:
•
-%
(default value): You enter a static IP address.
•
0&&
: Your device dynamically assigns an
IP address to the remote terminal.
•
0&&
: Your device is dynamically assigned an
IP address.
Default Route
Only if IP Address Mode =
-%
and
0&&
Select whether the route to this connection partner is to be
defined as the default route.
The function is enabled with
#/
.
The function is disabled by default.
Create NAT Policy
Only if IP Address Mode =
-%
and
0&&
When you configure an ISDN Internet connection, specify
whether Network Address Translation (NAT) is to be activated.
The function is enabled with
#/
.
The function is disabled by default.
Local IP Address
Only if IP Address Mode =
-%
Assign the IP address from your LAN to the ISDN interface
which is to be used as your device's internal source address.
Route Entries
Only if IP Address Mode =
-%
Define other routing entries for this connection partner.
•
; 0&&
: IP address of the destination host or
network.
•
*&
: Netmask for Remote IP Address If no entry is
17 WAN
Funkwerk Enterprise Communications GmbH
280
bintec Rxxx2/RTxxx2
