Field
Description
ers are queried in order of their priority (see Priority) until a
positive response is received or a negative response is re-
ceived from an authoritative server.
•
0
: A negative response to a request is accep-
ted, i.e. a request is not sent to another server.
The device's internal user administration is not turned off by
. It is checked after all servers have been
queried.
TCP Port
Shows the default TCP port (
) used for the pro-
tocol. The value cannot be changed.
Timeout
Enter time in seconds for which the NAS is to wait for a re-
sponse from .
If a response is not received during the wait time, the next con-
figured server is queried (only if Policy =
*!
) and the current server is set to status
>/%
.
The possible values are
to
, the default value is
'
.
Block Time
Enter the time in seconds for which the current server is to re-
main in blocked status.
At the end of the block time, the server is set to the status spe-
cified in the Entry active field.
The possible values are
to
'
, the default value is
. The
value
means that the server is never set to
>/%
status
and thus no other servers are queried.
Encryption
Select whether data exchange between the server
and the NAS is to be encrypted with MD5.
The function is activated by selecting
#/
.
The function is enabled by default.
If the function is not enabled, the packets and all related inform-
ation are transferred unencrypted. Unencrypted transfer is not
recommended as a default setting and should only be used for
debugging.
Funkwerk Enterprise Communications GmbH
10 System Management
bintec Rxxx2/RTxxx2
107
