Field
Description
•
4@0
Only run CHAP (PPP Challenge Handshake Authentic-
ation Protocol as per RFC 1994); password is transferred en-
crypted.
•
074@0
: Primarily run CHAP, otherwise PAP.
•
(-!4@0
: Only run MS-CHAP version 1 (PPP Microsoft
Challenge Handshake Authentication Protocol).
•
074@07(-!4@0
: Primarily run CHAP, on denial then the
authentication protocol required by the connection partner.
(MSCHAP version 1 or 2 possible.)
•
(-!4@0
: Run MS-CHAP version 2 only.
•
*
: Some providers use no authentication. In this case, se-
lect this option.
Encryption
Only for Authentication =
(-!4@0
If necessary, select the type of encryption that should be used
for data traffic to the connection partner. This is only possible if
STAC or MS-STAC compression is not activated for the con-
nection. If Encryption is set, the remote terminal must also sup-
port it, otherwise a connection cannot be set up.
Possible values:
•
*
(default value): MPP encryption is not used.
•
#/
: MPP encryption V2 with 128 bit is used to RFC
3078.
•
:& %,#/
: MPP encryption V2 with 128 bit is
used as compatible with Microsoft and Cisco.
Callback Mode
Select the Callback Mode function.
Possible values:
•
*
(default value): Your device does not call back.
•
0%
: Select one of the following options:
•
* $
: Your device calls the connection
partner to request a callback.
•
:& 4/ (
: Your device calls the connection
partner to request a callback via CBCP (Callback Control
Protocol). Needed for Windows clients.
•
&&
: Select one of the following options:
17 WAN
Funkwerk Enterprise Communications GmbH
282
bintec Rxxx2/RTxxx2
