Funkwerk FT4 Operating Manual Download Page 46

Page: 46 / 151

Structure and function

Display

Footer

The footer at the bottom display edge shows functions you can activate with the

‹Left

softkey

›

and

‹Right softkey›

keys. The following symbols are displayed, depending

on the operating situation:

Footer in the display (example)

Meaning of the displayed information

Symbol

Meaning

To execute this function, press the key

‹Left softkey›

. The designation

and function of this field vary, depending on the operating situation.

To execute this function, press the key

‹Right softkey›

. The designa-

tion and function of this field vary, depending on the operating situa-
tion.

Indicates the personal emergency signal mode if the radio set is
logged into the personal emergency signal centre. For further informa-
tion please refer to chapter

„Personal emergency signal functions“ >

„Login status“ (p. 124).

Summary of Contents for FT4
























































































































































Search results

Summary of Contents for FT4

Reviews:

Funkwerk FT4, Operating Manual, Page: 46 / 151

Search results

Summary of Contents for FT4

Reviews: