Funkwerk FT4, Operating Manual, Page: 138 / 151

134 Personal emergency signal functions
Operation
4. Press the
‹Right softkey›
key to execute the function.
The S
ECURY SENSOR TEST
menu is displayed.
The radio set will then prompt you to perform the sensor test, see section
„Sensor
test“ (p. 127).
After successfully completing the sensor test, the display indicates the current
log-in status, e.g. "Secury - logged into Secury server".

Done.
Please note:
During the sensor test, the sensors for all emergency signal functions programmed
on the radio set are being tested. In the meantime, you have to initiate a variety of dif-
ferent actions on the radio set. These actions are described
in section „Perform the
sensor
test“ (p. 128).
If your radio set detects a faulty sensor, the pertinent display remains set to T
EST
.
The radio set transmits a technical alarm to the personal emergency signal centre.
Display with menu S
ENSOR TEST