Funkwerk FT4, Operating Manual, Page: 131 / 151

Personal emergency signal functions 127
Putting into operation
4. Press the
‹Right softkey›
key to execute the function.
The radio set will then prompt you to perform the sensor test, see
section „Sensor
tes
t“ (p. 127).
After successfully completing the sensor test, the radio set logs into the personal
emergency signal centre.

Done.
Sensor test
During the sensor test, the radio set tests the integrated sensors. Before the radio set
logs into the personal emergency signal centre, the radio set will prompt you to test
the sensors.
Please note:
During the sensor test, the sensors for all emergency signal functions programmed
on the radio set are being tested. In the meantime, you have to initiate a variety of dif-
ferent actions on the radio set. These actions are described in secti
on „Perform the
sensor te
st“ (p. 128).
The menu S
ENSOR TEST
on the display guides you through the test procedure. Each
individual sensor is tested consecutively. When a sensor passes the test, the perti-
nent display content changes from
T
EST
to OK . An acoustic signal is heard additio-
nally (if programmed)
Display with menu S
ENSOR TEST