ATR833 / P/N 833-(1xx)-(1xx)
Operation and Installation
2.5 Frequency Settings
The input of a frequency can be done in three different ways, by:
•
Direct/manual input (with the lower rotary knobs for the
and
Range).
•
Selection from the user-defined frequency list (Memory Positions 0-99)
with the
rotary knob.
•
Selection from the frequency database (if loaded) in the DATA-Mode
Between these input modes, it can be switched with the
key. The
currently active mode is indicated on the third line on the right.
•
No indication... .. direct input with
and
or selection from the
user-defined frequency list with
•
USER................ no frequency selection only Edit and Storing in the
user-defined frequency list.
•
DATA ................ Search in the frequency database (if loaded)
2.5.1 Manual Input
The frequency can be set with the
and
rotary knobs
. It is
indicated as Standby-Frequency in the lower line.
During the input the existing name (left on the third line) is overwritten.
The indication of the memory position (format of the brackets) changes
from
[
xx
]
in
>
xx
<
, showing that the new Standby-Frequency does not
comply with the contents of the indicated frequency memory position.
switches active and standby-frequencies.
2.5.2 Select frequency from memory position
With
, a stored frequency can be selected from the user-defined
frequency.
In this case the respective memory position [xx] (xx =
becomes 0 … 99) as well as the frequency name and the stored
frequency are indicated.
2.5.3 Select frequency from the frequency database
This function is available only with installed frequency database.
15
Dokument-Nr.: 01.1402.010.71e / Revision: 1.01
