Funkwerk artem ComPoint Butterfly, Manual, Page: 35 / 118

The artem ComPoint Manager
2-9
Configuring Devices
Basic Configuration
1. Double-click the MAC address of the device to be config-
ured in the list. If you do not know the MAC address of the
device: there is a label attached to each device which con-
tains the most important specifications, among them the
MAC address.
The following dialog box is displayed:
2. Enter the network parameters (Device name, IP address,
Subnetmask , and Gateway ) and confirm them with OK .
Note:
The parameter Device name may consist of 32 characters, as a
maximum.
When entering the parameter Device name , only the letters from
“a” to “z”, “A” to “Z”, the digits “0” to “9”, the hyphen “-”, and the
dot “.” must be used to avoid errors caused if other systems inter-
pret the parameter
Device name . The first character has to be a let-
ter, the last character must not be a dot “.” or a hyphen “-”. A single
character is not permitted as a name.