m4_eng(11.03.02)
- 23 -
Kompetent für Elektroniksysteme
***** FunkTronic GmbH Dokuprinter *****
No:
date
time
base no.
remark
0037 15:03:94
14:27:59
12310
incoming call
0038 15:03:94
14:29:32
2634
telephone
0039 15:03:94
14:32:45
end
0040 15:03:94
14:35:22
12312
call to mobile
0041 15:03:94
14:39:05
12316
call to mobile
Printer Text
All the printer text can be edited to provide the headline, for example, with a company related
text or to print the text in the language of the corresponding country. The text of the headline
is placed in EPROM addresses 7C02H to 7C45H. The text of the title is placed at addresses
7C4AH to 7C8AH. The remaining text start with EPROM address 7D00H. If no suitable EPROM
programmer is available, modications can also be done by FunkTronic. Those modications
are placed to account.
Real Time Clock
Function
The built in real time clock is supplied by a NC battery and doesn‘t require any maintenance.
If the printer interface is used, the time should occasionally be checked since date and time
are printed out on every line.
Setting Time
The time setting is selected within the setup menu. At rst, the date is shown on the display (e.g.
29-03-98). Now the date can be overwritten by using the numeric keys. After pressing the (F3) key
the current time is displayed (e.g. 13-45-20). Now the time can be overwritten. The input is conrmed
by pressing the (F4) key and the setup is terminated. If the time shall not be modied, you can quit
the setup menu by pressing the (F3) key.
Display Time
By pressing the (Time) key the time is shown on the right display as long as the key is pressed.
A call previously stored in the display will not be changed. After releasing the key the previous
display contents will be restored.
Channel Selection
Entering Channel Number
The (F2) key has to be pressed to enter the channel input mode. The current channel is shown
on the left display and the input digit ashes. If an ID-code had been displayed there, it will
not be lost.
Now the new channel is entered by using the numeric keys. After complete input a check is made,
using the channel table, in order to verify if the channel is permitted to be switched. If the selected