EVO EXPERT Manual
92/105
Appendix B: Fungilab Data Boss Evo
B.1.- Introduction
B.1.1.- About Fungilab Data Boss (FDB)
Viscometer Evo Expert can be controlled remotely using the Fungilab Data Boss (FDB) software.
This software allows the documentation of each experiment with a name, date, number, user,
notes, etc., which is essential for performing follow-up experiments. The possibility of programming
the viscometer for simple measurements, ramps and other configurable tests is an important tool
for the study of different materials’ behaviour.
The Fungilab Data Boss software has three basic functions: it controls the execution of the
experiment, the storage of the results obtained and the analysis of the tests carried out.
Experiment execution:
Test-run and data base record opening
Viscometer control; stopping and starting
Viscosity sample test
Real-time graphic presentation of results
Data Storage:
Store results from experiment
Verifies obtained results
Organizes data base with additional information
Data consultation and analysis:
Clear presentation of data
Multiple consulting choices
12 different possible graphics
Different types of listing methods can be acquired from other applications
B.1.2- System requirements
The following system requirements must be met in order for Fungilab Data Boss Evo software to
operate properly.
Operating system
Windows XP, Windows Vista, Windows 7,
Windows 8 (supported 32bits and 64bits versions)
RAM (used by the software)
32 MB minimum; at least 64 MB recommended
Hard drive space
10 MB
Mouse
Required
USB Port
Required
B.1.3- Registering Fungilab Data Boss
The software needs to be registered in order to perform new experiments. In order to register the
software, it is needed an authorization code that can be obtained from Fungilab.
Please have the following information available when contacting Fungilab so that they may assist
you.
Product model
Product Serial Number
