16
English
4 Use your TV
Switching on your TV or putting it in Standby
mode
To Turn the TV On from Standby or Off to Standby
• Press on the Front panel or the Remote control.
Adjusting volume
To decrease or increase volume
• Press
VOL
◄
/
►
on the Front panel or press
VOL + /
−
on the
Remote control.
VOL
◄
: Volume Down
VOL
►
: Volume Up
To mute or unmute sound
• Press on the remote control to mute the sound.
• Press again or
VOL + /
−
to recover the original sound.
Switching channels
To select Channels by using CH
▼
/
▲
or CH + /
−
• Press
CH
▼
(Down) /
▲
(Up) on the Front panel or press
CH + /
−
on the Remote control.
To select Channels by using the NUMBER buttons
• For Digital channels, press a number followed by a dot “•” and the
corresponding sub channel number.
–
When selecting Digital channel 11.1
Be sure to press • before entering the subchannel number.
–
When selecting cable or Analog channel 11
Press
PREV.CH
to return to the previously viewed channel.
Note(s)
• Energy consumption contributes to air and water pollution. When the AC Power cord
is plugged in, your TV consumes energy with a very low Standby Power consumption.
Remote Control
TV
Remote Control
TV
Note(s)
• To select the non-memorized channels, use
the NUMBER buttons
.
•
No Signal
will appear on the TV screen after the subchannel broadcast is over.
•
Audio only program
message will appear on the TV screen, when you receive only
sound signal.
TV
Remote Control
Digital TV operation
Analog/Cable TV operation
