To unlock the chain for replacement or other operation, follow below instructions:
1. To disconnect the Drive link, isolate the link. (Fig.4)
2. Firmly squeeze the link bushings together so that the pins and plates decouple. (Fig.5)
3. Pull the plates apart. (Fig.6)
Drive Link cannot be reused if removed. Use a new Drive Link to reassemble.
6. Pairing
Follow the procedure below for new shifter pairing:
With the drivetrain on, push the SET button until
both LEDs illuminate green –the system is now in
SET mode.
Roll the shifter hood forward to expose the
transmitter cover.
To put the shifter in pairing mode push and hold
the pairing switch and simultaneously push either
shifter button.
When the shifter enters pairing mode, the pairing
button will illuminate red.
1
2
3
4
