Full Speed Ahead K-Force WE User Manual And Instructions Download

Page: 15 / 20

Once the cover is partially open insert the screw

driver from the side to completely remove the

cover.

Remove the coin cell battery from the holder and

install new battery.

Reinstall the cover and reposition the hood on the

housing.

If the other shifter battery is low, repeat the

procedure for replacement.

Make sure to respect correct polarity.

10. Diagnostics

LED Indication

Issue

Action

Remedy

Both LEDs red steady on

Front derailleur stall

• Check that the derailleur

is mounted correctly

• Check the SET point

Both LEDs yellow steady on Rear derailleur stall

• Check that the derailleur

is mounted correctly

• Check the SET point

LED 1 green and LED 2 red

steady on

Communication absence

between front and rear

derailleur

• Check connections of both

derailleurs.

• Check wires for damage

LED 1 red and LED 2 green

steady on

Failed reply from rear

derailleur to front derailleur

at end of movement.

Probable loss of rear

derailleur position

• Check the connection of

both derailleurs connector.

• Check the SET point

Summary of Contents for K-Force WE





















Search results

Summary of Contents for K-Force WE

Reviews:

Related manuals for K-Force WE

Brands by name

Popular brands

Full Speed Ahead K-Force WE, User Manual And Instructions

Search results

Summary of Contents for K-Force WE

Reviews:

Related manuals for K-Force WE

Brands by name

Popular brands