Assembly Stage 4: Connect the Air Compressor
Air is used as a pressurized gas to assist in cutting and engraving operations. Pressurized air is essential to
safe and efficient cutting operations. This not only helps cut through material more quickly but also helps
prevent the formation of flames.
3.
Connect to Power:
Plug the air compressor into a separate power strip not associated with the Muse
17
1.
Add tubing:
Remove the air compressor from its packaging. Gently attach the silicone tube on the air
compressor.
2.
Attach Air Hose to Laser Cutter:
Insert the other end of airline hose into the “air inlet” nozzle in the
back of the laser cutter via the barbed air connect fitting.
