70
Maintaining Your Camera
Follow these simple tips to keep your camera clean and functioning at peak performance: Just like with
mirrors, you will need to clean the camera lens periodically. Use lens wipes to gently clean the camera lens as
needed. Just like with mirror alignment, it may occasionally be necessary to correct the camera offset if the
camera is bumped or jostled. Follow the “Correcting Offset Camera Calibration” instructions below.
3D Camera Calibration
Muse Titan can detect the height and position of the material using the camera feature. It is possible, however,
that the height and positional accuracy of the calibration can be jarred out of alignment. To check calibration,
follow these instructions:
1. Power on Machine:
Power on your Muse unit and verify all the connections.
2. Connect :
Connect to the software via IP address.
3. Lid:
Lift the lid to the full and upright position.
4. April tags:
Make sure all the camera registration tags are visible.
5. Redirect:
In your browser bar Copy and Paste :5004/setup/laser tools to the end of your IP
address so it read (YOUR IP ADDRESS):5004/setup/laser tools to look like the below image.
