Vector Engraving & Parameters
(G)
Window appears when the vector file is detected and is used to input vector settings.
Hide Window:
Click to hide vector engraving parameters window.
Show All Parameters:
Toggle to show or hide all parameters.
Change Position:
Drag with mouse to reorder any color.
Color Indicator:
Separates vector cuts with color indicators.
Speed:
Input speed settings.
Power:
Input power settings.
Current:
Input current settings.
Passes:
Input the number of passes for the laser.
43
Project Info
(H)
This window displays information regarding the active project.
Active Project Name:
Displays name of active project.
Modified:
Displays last date project was modified.
Job Time Estimate:
Displays estimated time until job is complete.
Unit:
Choose unit of measurement from the following
Pixels:
Sets unit of measurement to pixels.
Centimeters:
Sets unit of measurement to centimeters.
Millimeters:
Sets unit of measurement to millimeters.
Inches:
Sets unit of measurement to inches.
Picas:
Sets unit of measurement to picas.
Points:
Sets unit of measurement to points.
Grid:
Toggles grid on/off/isometric.
On:
When “on” grid displays in workspace.
Off:
When “off” grid does not display in workspace.
Width:
Displays width of item according to chosen unit of measurement.
Height:
Displays height of item according to chosen unit of measurement.
