12
ID of the discharge on display:
Des1
:
Discharge 1;
Des2
:
Discharge 2;
Des3
:
Discharge 3.
1
4
6
8
5
7
2
3
1
2
3
4
5
6
7
8
Out
: Percentage of power related to the
outputs active in
RCK-602
plus.
Temp
: It is the value of the temperature sensor.
Press
: Is the pressure value read by
transducer.
Setpoint
: Displays the current value of
the setpoint, either the economy pressure setpoint
or main pressure setpoint. (Whichever is active).
12.SUMMARY SCREEN
12.3. Discharge summary screen:
This screen displays the basic status of the Discharge line enabled.
To configure the Discharge lines, go to
Main menu Function settings Discharge
. For more information, see Main Menu function
1.1.3
cc
cc
Setpoint:
3
00.0 psi
Press:
33
0.0 psi
Temp:
5
0.0°C
Su
b
cooling: 5.0°C
Ext.
T.:
38
.0/
34
.0°C
Req: 100% Out: 100%
Dis
1 On
Eco
Pd
M
Req
: Percentage of power required by the
system related to the operating range.
Ext. T.
: Represents the value of the
external temperature sensors used for floating
and adiabatic cooling.
The first value is from the dry bulb temperature
sensor (configured in Adiabatic Cooling) or
temperature sensor (configured in Floating
Cooling).
The second value represents the Wet Bulb
sensor (parameterized in Adiabatic Cooling).
This information will only be displayed if the
sensors are parameterized.
Sub
cooling
: Calculation of the subcooling
based on measured pressure and temperature
and the type of refrigerant used. If the controller
identifies that the suction is working in the
refrigerant's transcritical region, the message PC
is displayed.
