9
Parts required: Top handle (8), Handle securing set x 2 (19)
1.
Place the top handle (8) onto the base
frame (13) aligning the holes in the frame
with the holes in the handle.
2.
From the handle securing set (19), fit bolts
through the holes and fasten the nuts using
spanner (16) & hex key (18) (fig. 3).
ASSEMBLY
Parts required: Wheel x 2 (7), wheel axle, washer & R-clip x 2 (15)
1.
Slide a axle onto the wheel (7) (fig. 1).
2.
Slide the axle through the hole in the base
frame (13) wheel bracket and secure in
place with washer and R-clip (fig. 2).
3.
Repeat above steps for the opposite side.
Fig. 3
Fig. 2
Fig. 1
WARNING!
Ensure the tool has been shut off and completely stopped
before performing any of the following operations.
Wheels & axle
Top handle
WARNING!
Some parts are heavy, two-person lift may be required to
avoid injury.
