11
SETUP & PREPARATION
Attaching spray gun and lance
Note:
Remove and discard the clear shipping caps from the pumps high pressure
threads.
Fig. 7
WARNING!
To avoid pump damage, you must assemble the lance to the
spray gun and attach all hoses before you start the engine.
Attaching high pressure hose (10)
1.
Uncoil high pressure hose (10) and thread
one end onto the spray gun (1) (fig. 8).
2.
Tighten the collar by hand to secure the
hose to the spray gun.
3
Thread the opposite end onto the high
pressure pump outlet (fig. 9).
4.
Tighten the collar by hand to secure.
Fig. 8
Fig. 9
1.
Thread lance (4) onto spray gun (1) (fig. 7).
2.
Tighten the collar by hand to secure the
lance to the spray gun.
