background image

5

Congratulations on purchasing a Full Boar Petrol Pressure 

Washer.
Your Full Boar Petrol Pressure Washer FBPPW-3200 is 

designed to deliver a consistent high-pressure flow that’s 

ideal for on-site cleaning bricks, driveways, patio’s and 

pathway’s or washing equipment, cars, boats, motorbikes 

with appropriate spray nozzle size for your application.

INTRODUCTION

RISK OF EXPLOSION OR FIRE
What can happen:

•  Spilled petrol and its vapours can become ignited from cigarette sparks, electrical 

arcing, exhaust gases and hot engine components such as the muffler.

• Heat will expand fuel in the tank which could result in a fire.
• Operating the tool in an explosive environment could result in a fire.
•  Muffler exhaust heat can damage painted surfaces, melt any materials sensitive to heat 

(such as siding plastic, rubber or vinyl) and damage live plants. Keep hot tool away 

from other objects.

•   Improperly stored fuel could lead to accidental ignition. Fuel improperly secured could 

get into the hands of children or other unqualified persons.

How to prevent it:

•  Shut off engine and allow it to cool before adding fuel to the tank.
•   Use care when filling the tank to avoid spilling fuel. Move tool away from fuelling area 

before starting engine.

•  Keep maximum fuel level 20mm below top of tank to allow for expansion.
•  Operate and refuel in well ventilated areas free from obstructions. Never re-fuel 

indoors.
•   Store fuel in a approved container (AS/NZS 2906-1999) for petrol. Store in a secure 

location away from the work area. Make sure the container is clearly marked “fuel”.

SAFETY INSTRUCTIONS

WARNING! 

When using mains-powered equipment, basic safety precautions, 

including the following, should always be followed to reduce the risk of fire, 

electric shock, personal injury and material damage.

GENERAL SAFETY WARNINGS

Read and understand the manual prior to operating this tool. 
Save these instructions and other documents supplied with this tool for future reference.

Summary of Contents for FBPPW-3200





























Reviews: