20
OPERATION
WARNING!
The power supply for this product should be protected by a residual current
device (rated at 30mA or less). A residual current device reduces the risk of electric shock.
The bench drill is equipped with a no-volt trip that is designed to protect the operator from
an undesired restart following a power outage. Should this occur, the machine must be
manually restarted.
Switching on and off
1.
To switch on the machine, push in the green On button
“I” (11); the machine starts up (Fig. 36).
2.
To switch off , press the red Off button “O” (12); the
device shuts down (Fig. 36).
Note.
Ensure that you do not overload the device. If the
sound of the motor drops in pitch during operation, it is
being overloaded.
Do not overload the device to the point where the motor
comes to a standstill. Always stand in front of the machine
during operation.
Note.
Pressing the Emergency Stop button (13) enables the
machine to be brought to an immediate standstill in an emergency.
R.P.M
LED worklight
The drill table (18) is equipped with an LED worklight for illuminating the work area. This can
be switched On and OFF by the switch (14)
WARNING!
Please note that sawdust must be properly extracted when working
with wood, as it can pose a health hazard. Ensure that you wear a suitable dust mask
when performing work that generates dust.
Drilling wood
Please note that sawdust must be properly extracted when working with wood, as it can
pose a health hazard. Ensure that you wear a suitable dust mask when performing work that
generates dust.
Fig. 36
Summary of Contents for FBDDP-7500
Page 25: ...25 NOTES...
Page 28: ...28...
