Full Boar FBDDP-7500, Instruction Manual

Page: 15 / 28

15
40 °
30
°
20
°
20
°
10 °
10
°
0°
40
°
30
°
20
°
20 °
10
°
10 °
0°
40
°
30
°
20
°
20
°
10 °
10
°
0°
40 °
30
°
20
°
20
°
10 °
10
°
0°
ADJUSTMENTS
Fig. 17 Fig. 18
Fig. 19
Table height adjustment
1. Loosen the table support
lock (Fig. 17).
2. Rotate the table
adjustment handle (27) to
set the desired drill table
(18) height. Tighten the
table lock to secure the
drill table (18) in position
(Fig. 18).
40
°
30
°
20
°
20
°
10
°
10
°
0°
40
°
30
°
20
°
20
°
10
°
10
°
0°
40
°
30
°
20
°
20
°
10
°
10
°
0°
40
°
30
°
20
°
20
°
10
°
10
°
0°
Table bevel adjustment
1.
The bevel angle is adjusted by loosening the socket screw that is located underneath the
table support (28) with supplied hex key (35) (Fig. 19).
2.
With the aid of the angle scale (Fig. 20), set the drill table (18) to the desired
angle (Fig. 21).
3. Re-tighten the socket screw in order to lock the drill table (18) into its position.
40
°
30
°
20
°
20
°
10 °
10
°
0°
40 °
30
°
20
°
20
°
10
°
10
°
0°
40
°
30
°
20
°
20 °
10
°
10
°
0°
40
°
30
°
20
°
20
°
10 °
10
°
0°
40
°
30
°
20
°
20
°
10
°
10
°
0°
40
°
30
°
20
°
20
°
10
°
10
°
0°
40
°
30
°
20
°
20
°
10
°
10
°
0°
40
°
30
°
20
°
20
°
10
°
10
°
0°
40 °
30
°
20
°
20
°
10
°
10 °
0°
40
°
30
°
20
°
20 °
10
°
10 °
0°
40 °
30
°
20
°
20
°
10 °
10
°
0°
40 °
30
°
20
°
20
°
10
°
10 °
0°
40 °
30
°
20
°
20
°
10
°
10
°
0°
40
°
30
°
20
°
20 °
10
°
10 °
0°
40
°
30
°
20
°
20
°
10
°
10 °
0°
40 °
30
°
20
°
20
°
10 °
10
°
0°
Rotating table adjustment
1.
Loosen the table lock (10) to rotate the
drill table (18) to the left or right
(Fig. 22).
2. Re-tighten table lock (10) when the drill
table (18) is in the desired position.
Fig. 20
Fig. 22
Fig. 21
WARNING! Before adjusting the angle, ensure the table lock (10) is tightened.