manualshive.com logo in svg

Fukuda Denshi LX-8000 Series, Operation Manual

Share
Download
Fukuda Denshi LX-8000 Series Operation Manual Download Page 4

ii 

Intended Use of this Equipment 

This equipment is designed for the following <Intended Use>. 
 
<Intended Use> 
This equipment is intended for patient monitoring in surgery room, ICU, ward, 
emergency room in the medical facility by measuring ECG, respiration and SpO

2 

and transmitting the measured data by wireless network to the central monitor 
continuously. 
 
This equipment is intended to be used by healthcare professionals. Users should 
have a thorough knowledge of the function and operation before using this 
equipment. The maintenance of this equipment should be performed by skilled 
personnel who received a training of possible hazards and measures to avoid those 
hazards. Also, your local regulation must be followed. If this equipment is used for 
the purpose other than intended, or if the user does not follow the safety 
instructions, the following hazard may result. 

・

 

Hazard to the Life and Health of the Patient or the User 

・

 

A Problem Related to Medical Practice 

・

 

Damage to the Equipment 

Summary of Contents for LX-8000 Series















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands