Fukuda Denshi HR-800, Service Manual

Page: 9 / 70

Precautions about Connections to Peripheral Devices
In the interest of safe and sufficient performance of this equipment, the connection of other
manufacturers’ equipment to the monitor is not authorized, unless the connection is explicitly
approved by Fukuda Denshi. It is the user’s responsibility to contact Fukuda Denshi to determine
the compatibility and warranty status of any connection made to another manufacturer’s
equipment.
W A R N I N G
For the connector with mark, only the peripheral devices specified b
Fukuda Denshi should be connected with the given procedure. Use of an
unspecified device may cause electric shock to the patient and/or ope
due to excessive leakage current.
y
rator
When connecting peripheral devices to this unit, it is the user’s responsibility to verify that the
overall system complies with EN/IEC 60601-1-1, “Collateral Standard: Safety Requirements for
Medical Electrical Systems”.
Accessories and Optional Accessories
W A R N I N G
Use only the cables specified by Fukuda Denshi.
Use of other cables may result in increase in emission or decrease in
immunity.
Precautions about the HR-800 System
D A N G E R
When connecting to other equipments, contact our service
representative.
Danger such as electric shock may result to the patient and operator.
W A R N I N G
z
Do not connect a unit or cable not authorized by Fukuda Denshi to
any I/O connector. If done so by mistake, this system cannot deliver
its maximum performance and the connected units may be damaged,
resulting in a safety hazard.
z
If this equipment is used under an environment not fulfilling the
specified condition, not only that the equipment cannot deliver its
maximum performance, the equipment may be damaged and safety
cannot be ensured. If using the equipment under condition other than
specified, contact your nearest representative.
When lifting this unit, hold the bottom part of the unit.
v