Fukuda Denshi HR-800, Service Manual

Page: 67 / 70

Periodic Check
●
Introduction
The periodic maintenance check is intended to check the medical equipment used daily in a
medical institution to prevent failures and accidents and to ensure safety and reliability.
As these are general check procedures covering the whole monitoring equipment, perform the
check procedure for the corresponded function of the equipment.
The check procedures are described for daily check and periodic check. Each check items must be
performed according to the described check procedure.
The consignee can select the check items according to the product quality, frequency of usage, and
maintenance check period. However, electrical safety items must also be performed.
For details of the electrical safety check procedure, refer to IEC 60601-1, EN60601-1.
Periodic Check List
No. .
Item
Details Criteria Judgment
Note
(Repair)
1. Operation Manual Check visually, and by cable
conduction test
□ OK/ □ NG
Accessories
2. Recording Paper Check storage condition of the
stock.
□
OK/
□
NG
1. Exterior scratch, crack,
deformation No damage should be found.
□
OK/
□
NG
2. Loose label, panel, stain Indication should be readable.
□
OK/
□
NG
3. Key, lever, etc. No damage should be found.
□
OK/
□
NG
Visual
Appearance
4. Thermal head Should be clean.
□ OK/ □ NG
1. Membrane key, level, cassette Should operate smoothly.
□ OK/ □ NG
2. Lock Should lock properly.
□
OK/
□
NG
3. Feeding
No abnormal sound should be
found.
□
OK/
□
NG
Me
ch
an
ic
al
Main Unit
4. Platen Roll No abnormality should be found.
□ OK/ □ NG
□
OK/
□
NG
□
OK/
□
NG
Overall Judgment
□ OK/ □ NG
Device Type Module Recorder Model Type HR-800 Serial No.
Location Purchased Date
Inspected Date Inspected by Approved by
12 － 5