Fukuda Denshi HR-800, Service Manual

Page: 25 / 70

1. Open/Close Lever
Is used to open the paper holder.
2. Paper Holder
Set the recording paper.
3. READY LED (READY)
・
If the magazine is open when recording starts or while recording is being performed,
or lights in “orange”.
・
When the magazine is closed, LED or lights in “green”.
・
When the recording paper is used up, LED or will light in “orange”.
4. Record Key (RECORD)
While the recording is being performed, LED or will light in “blue”. Pressing
the key again will stop the recording.
5. Paper Feed Key (FEED)
Even if the recording is not performed, the LED or will light in “blue” while
the key is being pressed.
Releasing the key turns off or and stops feeding the paper.
●
Rear Side
6. U-LINK Connector
6. U-LINK Connector
Connects to the main unit.
3 － 3