Fujitsu STYLISTIC Q5010, Operating Manual

Page: 78 / 87

Troubleshooting and tips
Error message/cause Resolution
CMOS battery bad
If the error message occurs repeatedly, the
buffer battery in the Tablet PC is
fl at.
► Contact your sales outlet or our customer
service centre.
System CMOS checksum bad - default configuration
used
The system con fi guration information is
incorrect.
► Switch off the Tablet PC.
► Switch on the Tablet PC.
► In the
BIOS Setup
, select the
Exit
menu.
► Select the entry
Load Setup Defaults
.
► Select
OK
and press the Enter key.
Extended memory failed at offset: xxxx Failing Bits:
zzzz zzzz
When testing the extended memory an error has
resulted at the address xxxx.
► Contact your sales outlet or our customer
service centre.
Keyboard controller error
► Switch off your Tablet PC using the ON/OFF
button.
► Wait 3 - 5 seconds and switch on the Tablet
PC again.
Keyboard error
If you are using an external keyboard:
► Check the connection and reboot the Tablet
PC.
nn Stuck key
► Make sure that no key is pressed.
Operating system not found
► Check in the
Boot
menu in
BIOS Setup
, to
ensure that the correct boot sequence is set.
► Make sure that the operating system is
installed on the corresponding drive.
Press <F1> to resume, <F2> to SETUP
This error message appears if an error occurs
during the self-test before starting the operating
system.
► Press the volume down button to start BIOS
Setup.
or
► If you are working with a keyboard, press
the
F1 or F2 key on the keyboard.
Real time clock error
► Contact your sales outlet or our customer
service centre.
nnnnK Shadow RAM failed at offset: xxxx Failing
Bits: zzzz
► Contact your sales outlet or our customer
service centre.
System battery is dead - Replace and run SETUP
► Contact your sales outlet or our customer
service centre.
System cache error - Cache disabled
► Contact your sales outlet or our customer
service centre.
System timer error
► Contact your sales outlet or our customer
service centre.
74 Fujitsu