Fujitsu STYLISTIC Q5010 Operating Manual Download Page 66

Page: 66 / 87

Connecting external devices

Connecting USB devices

USBports

On the USB ports, you can connect external devices that also have a USB port
(e.g. a DVD drive, a printer, a scanner or a modem).

USB devices are hot-pluggable. This means you can connect and disconnect
devices while your operating system is running.

USB 1.x has a maximum data transfer rate of 12 Mbit/s.

USB 2.0 has a data transfer rate of up to 480 Mbit/s.

USB 3.0 has a data transfer rate of up to 5 Gbit/s.

USB 3.2 (Gen1) has a data transfer rate of up to 5 Gbit/s.

With USB 3.2 (generation 2), the data transfer rate is up to 10 Gbit/s.

Additional information can be found in the documentation for the USB devices.

►

Connect the data cable to the
external device.

►

Connect the data cable to the USB
port on the Tablet PC.

►

Connect the data cable to a USB
port of the cradle.

Device drivers

USB devices will be automatically recognised and installed by your operating system.

Fujitsu

Summary of Contents for STYLISTIC Q5010
























































































Search results

Summary of Contents for STYLISTIC Q5010

Reviews:

Related manuals for STYLISTIC Q5010

Brands by name

Popular brands

Fujitsu STYLISTIC Q5010, Operating Manual

Search results

Summary of Contents for STYLISTIC Q5010

Reviews:

Related manuals for STYLISTIC Q5010

Brands by name

Popular brands