Fujitsu STYLISTIC Q5010, Operating Manual

Page: 29 / 87

Working with the Tablet PC
Using the stylus pen
Pen
3
4
2
1
1 = pen tip
2 = pen button (= right mouse button)
3 = pen button (= delete function)
4 = eyelet for optional pen strap
You can use the pen on your Tablet PC as an electronic writing implement to select items, and to
navigate through programs on it. Programs that support handwriting recognition also allow you to
write characters directly on the screen with the pen. You can also use the pen as a drawing tool.
A pen tether is available as an optional extra and you can use this to tie the
eyelet on the pen to the eyelet on the Tablet PC.
Use only the pen provided with your Tablet PC. Do not use substitutes that
were not designed for your Tablet PC. Replace the stylus tip if it is worn.
The warranty does not cover a scratched screen.
While writing, you should take care not to scratch the surface of the
display (e.g. with a wristwatch or bracelet).
The Tablet PC’s pen is an electronic instrument that can be damaged if
used improperly. Handle the pen with care.
The following list contains guidelines for proper pen handling:
• Do not gesture with the pen.
• Do not use the pen as a pointer.
• Do not use the pen on surfaces other than the screen of the Tablet PC.
• Do not try to turn the thumb grip on the pen. The grip is used to place
the pen in its slot or to remove it from the slot.
• Never store the pen with the tip bearing the weight of the pen (e.g. with the tip
down in a pen holder). If the pen is stored with the tip pointing down, this may
have an adverse effect on the pen mechanism (particularly at high temperatures).
In this case the pen tip may react as though it is constantly being pressed down.
To avoid damage, the pen should be stored in the slot when not in use.
The pen can be in fl uenced by electromagnetic fi elds (cursor quivers or
jumps). There may be a few areas on the screen where the cursor quivers
slightly in spite of pressing the pen down
fi rmly.
Fujitsu 25