System expansions
40
A26361-K520-Z100-4-7619
Removing the second hard disk drive
2
1
1
1
Remove the screw (1).
Pull the hard disk drive out of the
carrier (2).
Make the required settings on the
remaining hard disk drive
(e.g. stand alone).
Installing the hard disk carrier
3
4
2
1
Plug the data and the power supply connectors into the hard disk drive or into the hard disk
drives.
Lift the hard disk carrier into the system unit in the direction shown by the arrow (1) and push it
forward until it engages (2).
Press the hard disk carrier in the direction of the arrow (3) and press it downward (4).
i
If necessary, you must adapt the entry for the drive in the Setup menu.
