System expansions
A26361-K520-Z100-4-7619
41
Installing/removing a chipcard reader
").
Installing a chipcard reader
Remove the protector panel at the front of the carrier.
Push the chipcard reader board into the guide rail of the carrier with the component's side
toward the panel.
Fix the board with the screw.
3
1
2
Fix the cable on the chipcard reader (1) and on the connector for the chipcard reader on the
system board (see the Technical Manual of the system board).
Lift the chipcard reader into the system unit (2).
Push the chipcard reader in the direction of the arrow (3) until it clicks into position. Press
downward and toward the drive cage while doing so.
i
With the chipcard reader connected, no devices may be connected to serial port 2.
