Fujitsu ServerView Virtual-IO Manager V3.1 User Manual Download Page 305

Page: 305 / 362

3. Click

Next

to go to the

Select File

step.

4. Select the backup file from which you want to restore the configuration:

Select

Restore file from Management Station

to select a backup

file from the management station.

Select

Restore local file

to select a file on the computer on which

the GUI runs

5. When you click

Restore file from Management Station

, you select a

backup file from the list on the management station.

6. When you click

Restore local file

, you select a backup file on the local

computer on which the GUI runs. By clicking

Browse

the file selection

dialog box opens, which allows you to select the relevant backup file.
You can also enter the backup file name directly in the input field.

7. Once you have selected a backup file, click

Next

to go to the

Select

Data

step to define the data you wish to restore.

8. Select the configuration you wish to restore under

Select configuration

to restore

Select

Profiles

to restore the server profiles.

Select a server to restore the configuration saved for a blade server.

11.2.1 Restoring server profiles

1. Select

Profiles

in the

Select Data

step to restore server profiles. The

Restore Options

dialog box opens in which you specify additional

parameters. You can also open this dialog box by clicking the

Options...

button in the

Profiles

row.

2. Select the server profiles which will be restored:

If you select the

Restore only reassigned profiles

, only the profiles

that are reassigned to the selected servers will be restored (see section

"Restoring blade server configurations" on page 306

). If you do not

select the

Restore only reassigned profiles

option, all the profiles

saved in the backup file will be restored.

ServerView Virtual-IO Manager

305

11.2 Restoring the configuration

Summary of Contents for ServerView Virtual-IO Manager V3.1











































































































































































































































































































































































Search results

Summary of Contents for ServerView Virtual-IO Manager V3.1

Reviews:

Related manuals for ServerView Virtual-IO Manager V3.1

Brands by name

Popular brands

Fujitsu ServerView Virtual-IO Manager V3.1, User Manual

Search results

Summary of Contents for ServerView Virtual-IO Manager V3.1

Reviews:

Related manuals for ServerView Virtual-IO Manager V3.1

Brands by name

Popular brands