16. Check the IP address of the TFTP server in the
TFTP Address
field.
The value that you configured using the Configuration Wizard is dis-
played as the default.
If you want to change the TFTP address, click
Change TFTP
Address
.
The
Change TFTP Address
dialog box opens.
Enter the IP address of the TFTP server you want to use.
Click
OK
to confirm your changes.
17. If the table contains more than one management blade or connection
blade, repeat steps 15-16 for each individual management blade or con-
nection blade.
18. Click
Next
. The
Schedule Job
step opens.
19. Specify the time at which the job is to be transferred to the servers in
the
Transfer Time
field.
20. Specify the time at which the update phase is to be started on the
servers in the
Flash Time
field.
21. Only for updates that require a reboot of the system
(indicated by
Reboot
=
yes
):
Enter the time at which the servers are to be rebooted in the
Boot Time
field.
22. Click
Finish
to create the new job.
6.1.7.2 Copying a job
You use this procedure to copy a job to selected servers.
1. On the
Job Details
tab, select the job that you want to copy, see
"Job
Details tab" on page 71
.
2. Select
Copy Job
. The
Copy Job
wizard opens with the first step
Choose Server
.
ServerView Update Management
205
6.1 Update Manager
