RX330 S1
Options Guide
45
Expansion boards
Changing the riser card
8.2
Changing the riser card
Ê
Open the server as described in the
chapter “Preparation” on page 17
et
seq. .
Ê
Remove the riser card holder and all expansion boards as described in
section
“Installing in PCI slots of the riser card” on page 39
.
Figure 33: Removing the riser card (photo shows riser card 2)
Ê
Loosen the four screws and remove the riser card.
Ê
Insert the new riser card and fasten it with the four screws.
Ê
Install the expansion boards and the riser card holder as described in
section
“Installing in PCI slots of the riser card” on page 39
.
Ê
Close the server, connect it to the power outlet, and switch it on as described
in the
chapter “Completion” on page 59
et seq. .