RX330 S1
Options Guide
29
6
Main memory
V
CAUTION!
Observe the safety instructions in the
chapter “Safety notes” on page 11
et seq. .
V
CAUTION!
For the PRIMERGY RX330 S1 server the system boards D2440 and
D2932 are available. Make sure that the memory modules are suitable
for your system board.
The system board supports up to 32 Gbytes of main memory. Eight slots (4
banks with 2 modules) are available for the main memory. Each memory bank
can be populated with 512 Mbyte (only D2440), 1 Gbyte, 2 Gbyte or 4 Gbyte
ECC DDR2 SDRAM memory modules.The maximum main memory is 16 Gbyte
for installation with one CPU and 32 GByte with two CPUs.
6.1
Equipping rules
Figure 15: Structure of the main memory
–
If the memory modules are populated in pairs, each pair must consist of
identical memory modules (2-way interleaved mode)
–
The module capacity between pairs can differ: pair 2A/2B can be populated
with two 1 Gbyte modules and pair 1A/1B with two 2 Gbyte modules.
D2440
ECC DDR2-533 (PC4300) or ECC DDR2-667 (PC5300)
D2932
ECC DDR2-800 (PC6400)
CPU 1
DIMM1B
DIMM1A
DIMM2B
DIMM2A
DIMM4A
DIMM4B
DIMM3A
DIMM3B
CPU 2