RX330 S1
Options Guide
17
4
Preparation
V
CAUTION!
Observe the safety instructions in the
chapter “Safety notes” on page 11
et seq. .
4.1
Opening the server
Ê
Terminate all applications and shut down the server correctly.
Ê
If your operating system has not switched off the server, press the on/off
button.
Ê
Pull all power connectors out of the safety sockets.
Ê
Disconnect all cables on the rear of the server.
Figure 2: Pulling the server out of the rack
Ê
Loosen the two knurled screws (1) and pull the server as far as possible out
of the rack.
If the server is difficult to reach in the rack cabinet after you have pulled it out or
partially extending telescopic rails are used, remove the server completely from
the rack cabinet. If you do not want to remove the server, skip the following two
steps.
Ê
Push the safety springs (2) on both sides and carefully pull the server
outward.
Ê
Pull the server out of the rails and place it on a table, for example.
1
2