Fujitsu PRIMERGY RX2560 M1 Operating Manual Download Page 66

Page: 66 / 94

Operating Manual

TX2560

M1 / RX2560

Starting up and operation

6.2.1.1

Control elements

Pos. Button

Function

Reset button

This button is used to reboot the system. It can be
pressed using the end of a paper clip.

CAUTION!

Risk of data loss!

NMI button

This button is used to troubleshoot software and
device driver errors. It can be pressed using the end
of a paper clip.

CAUTION!

Use this button only if directed to do so by
qualified certified maintenance personnel!

ID button

This button highlights the ID indicator on the front and
I/O panels for easy server identification.

On / Off button

This button is used to switch the server on or off.

If the system is running an ACPI-compliant
operating system, the pressing the On / Off
button will performs a graceful shutdown.

Summary of Contents for PRIMERGY RX2560 M1































































































Search results

Summary of Contents for PRIMERGY RX2560 M1

Reviews:

Fujitsu PRIMERGY RX2560 M1, Operating Manual, Page: 66 / 94

Search results

Summary of Contents for PRIMERGY RX2560 M1

Reviews: