Fujitsu PRIMERGY RX2560 M1, Operating Manual, Page: 45 / 94

TX2560 M1 / RX2560 M1
Operating Manual 45
Important information
Information for ensuring electromagnetic compatibility
All data and signal cables must have sufficient shielding. The use of cable type
S/FTP Cat5 or higher is recommended.
Use of unshielded or badly shielded cables may lead to increased emission of
interference and/or reduced fault-tolerance of the device.
Other important information:
●
During cleaning, observe the instructions in section "Cleaning the server" on
page 84 .
●
Keep this operating manual and the other documentation close to the
device. All documentation must be included if the equipment is passed on to
a third party.
4.2 CE conformity
The system complies with the requirements of the EC directives
2004/108/EC regarding "Electromagnetic Compatibility" and
2006/95/EC "Low Voltage Directive" and the directive of the
European Parliament and Council 2011/65/EU. This is indicated
by the CE marking (CE = Communauté Européenne).